Responding to Audit Non-Conformances: A Step-by-Step Corrective Action Guide
Daria Van De Grift
An audit non-conformance can represent a lack of documentation or indicate a lack of strength in a food safety process. Defining the problem is just a first step. Food manufacturers have to establish what went wrong, contain the immediate issue, determine the “how” and “why” it occurred, and take steps to prevent this issue from recurring.
An audit non conformance response food safety protocol provides a consistent programmatic method for the QA and food safety staff to review the findings of an audit and record corrective actions. It also documents that the organization not only addressed the obvious issue but also went beyond it.
Corrective action for facilities subject to FDA preventive controls requirements may involve identification and correction of the problem, prevention of reoccurrence, evaluation of affected food for suitability and/or assessment for safety, and preclusion of food not determined to be safe from entering commerce. Additionally, FDA mandates applicable corrective actions to be documented. (U.S. Food and Drug Administration)
This guide explains how to handle an audit nonconformance from the initial finding through root cause analysis, corrective action, verification, and closure.
What Is an Audit Non-Conformance?
An audit nonconformance occurs when an auditor identifies evidence that a process, record, procedure, product, or system does not meet an applicable requirement.
The requirement could come from:
- FDA regulations
- HACCP plans
- GFSI-recognized standards
- SQF requirements
- BRCGS requirements
- Internal procedures
- Customer requirements
- Company specifications
Examples include:
- An incomplete sanitation record
- An employee following an outdated SOP
- Missing verification records
- A supplier document that has expired
- An unaddressed corrective action
- Failure to follow a documented procedure
- A food safety monitoring deviation without appropriate follow-up
An effective audit non conformance response food safety process should address both the immediate finding and the underlying system weakness.
Correction vs. Corrective Action
One of the most important distinctions in an audit nonconformance response is the difference between a correction and a corrective action.
Correction
A correction addresses the immediate problem.
For example, an auditor finds an incomplete temperature record. The facility may review the available information, correct the record where appropriate, and address the immediate documentation gap.
Corrective Action
Corrective action includes determining the cause of why the problem occurred and taking action to prevent recurrence.
For instance, if employees are consistently missing temperature checks because the monitoring process is confusing, filling in the missing record won’t address the root cause. The facility may need to modify the procedure, re-educate staff, increase supervision, or alter the monitoring protocol.
This distinction is central to an effective audit non conformance response food safety process.
Step 1: Understand the Non-Conformance
Before taking action, make sure the finding is clearly understood.
Review:
- The auditor’s observation
- The requirement that was not met
- Evidence supporting the finding
- Location or process involved
- Date and time
- Products or materials potentially affected
- Employees involved
Avoid immediately assuming that the solution is obvious.
An effective audit non conformance response food safety starts with a clearly defined problem statement.
Example
Instead of writing:
“Temperature records were not completed.”
Use a more specific description:
“The required cooking temperature record for Production Line 2 was incomplete for the identified production period, and the monitoring procedure did not define the required escalation process for a missed entry.”
The second description gives the investigation team more information to work with.
Step 2: Contain the Immediate Risk
There are findings that you must act on prior to the completion of the investigation.
Containment might involve, among other things, the following, depending upon the circumstances:
- Holding the Products Involved
- Stopping a process
- Segregating the affected substances
- Increasing monitoring
- Fixing a sanitation problem
- Take a wrong document out of circulation
- Suspending an activity (temporarily)
For food safety findings, product disposition is especially critical.
Corrective action procedures relating to a preventive control identified under this part must provide for evaluation of any affected food and, if the facility is unable to determine that the food is not adulterated, for preventing such food from entering commerce. (U.S. Food and Drug Administration)
Therefore, an audit non conformance response food safety should not focus exclusively on paperwork. The potential impact on food safety must be evaluated.
Step 3: Investigate the Root Cause
Once the immediate risk has been controlled, investigate why the non-conformance occurred.
Common root cause categories include:
People
- Inadequate training
- Lack of understanding
- Staffing issues
- Poor communication
Process
- Unclear procedures
- Missing instructions
- Ineffective workflow
- Poor escalation requirements
Equipment
- Equipment failure
- Incorrect calibration
- Poor maintenance
- Inadequate monitoring technology
Documentation
- Outdated SOP
- Missing form
- Incorrect version
- Incomplete instructions
Management System
- Insufficient verification
- Weak supervision
- Poor follow-up
- Inadequate resources
FDA’s current guidance on root cause analysis emphasizes defining the problem, gathering relevant information, using qualified personnel, and identifying causes that can support system-wide improvement. (U.S. Food and Drug Administration)
Step 4: Use Root Cause Analysis Tools
A structured investigation makes an audit non conformance response food safety more defensible.
Useful methods include:
5 Whys
Ask “why?” repeatedly until the team moves beyond the immediate symptom.
Issue: A sanitation verification record was not filled out in its entirety.
Why?
The verification was not completed by the employee.
Why?
The employee was uncertain as to when verification was needed.
Why?
The frequency of verification was not specified in the SOP.
Why?
The process had changed, and the procedure was not revised.
Therefore, it’s possible the root cause is related to reviewing and changing documents, not just “employee error.”
Fishbone Analysis
A fishbone diagram can categorize possible causes under areas such as the following:
- People
- Methods
- Equipment
- Materials
- Environment
- Measurement
This is useful when a non-conformance has multiple potential causes.
Step 5: Develop a Corrective Action Plan
Once the root cause is identified, define specific actions.
A strong corrective action plan should identify:
| Element | What to Document |
| Finding | What went wrong |
| Root cause | Why it happened |
| Correction | Immediate fix |
| Corrective action | Action to prevent recurrence |
| Owner | Person responsible |
| Deadline | Required completion date |
| Evidence | Proof of completion |
| Verification | How effectiveness will be checked |
A vague action such as “retrain employees” may not be sufficient.
Instead, specify what training will be provided, which employees require it, when it will occur, and how effectiveness will be evaluated.
Clear documentation is an essential part of audit non conformance response food safety because the organization needs to demonstrate what it actually did.
Step 6: Implement the Corrective Action
Responsibility is assigned and the action(s) are completed within the specified time frame.
Based on the root cause, the corrective actions could be one or more of the following:
- Amending an SOP
- Revising a form
- Retraining employees
- Fixing equipment
- Modifying a monitoring procedure
- Enhancing the verification frequency
- Modifying supplier controls
- Enhancing document approval
- Adding extra supervision
- Modifying a workflow
The correction should be to the root cause rather than just “making the finding go away” in an audit.
Step 7: Document Everything
Documentation should provide a clear history of the audit nonconformance from discovery to closure.
Maintain records of:
- Original finding
- Investigation
- Root cause analysis
- Immediate correction
- Product evaluation
- Corrective action
- Responsible person
- Completion date
- Supporting evidence
- Effectiveness verification
- Final approval or closure
FDA’s preventive controls framework specifically requires applicable corrective actions to be documented. (U.S. Food and Drug Administration)
Good documentation also makes future audits easier because the organization can demonstrate how previous findings were addressed.
Step 8: Verify Effectiveness
Completing a corrective action does not automatically mean the problem is solved.
Effectiveness verification asks:
Did the corrective action actually prevent the problem from recurring?
For example, if employees were retrained after failing to complete a monitoring record, QA could review records over subsequent production periods to determine whether the issue has stopped.
Verification could involve:
- Reviewing records
- Conducting follow-up inspections
- Observing employees
- Performing additional testing
- Reviewing trends
- Conducting a focused internal audit
This step is particularly important for audit non conformance response food safety because repeated findings may indicate that the original corrective action was ineffective.
Step 9: Close the Non-Conformance
A non-conformance should only be closed when the required actions have been completed and appropriate evidence has been reviewed.
The closure record should show:
- What was found
- Why it happened
- What was done
- Who completed the action
- What evidence supports completion
- How effectiveness was verified
- Who authorized closure
Avoid closing a finding simply because an employee completed a task. The evidence should demonstrate that the underlying issue was adequately addressed.
What If the Finding Is Repeated?
A repetitive Audit Non Conformance should be a warning to investigate further.
Repeated findings may indicate:
- A wrong root cause
- An ineffective corrective action
- Insufficient training
- Inadequate management review/control
- A poor procedure
- A more wide-ranging systemic issue
For instance, if the same documentation mistake is found on three consecutive audits, fixing the problem by retraining one employee over and over is not likely to be a solution.
The organization may also want to assess if the issue is a problem across departments, across shifts, or at other facilities for similar procedures.
Trend analysis may potentially identify these and other trends and be used as a basis for more global preventive actions. Root cause analysis is a tool that can help identify factors that may result in food safety incidents and that, therefore, can be used to enhance food safety at the system level. (U.S. Food and Drug Administration)
Common Mistakes in Audit Non-Conformance Responses
An audit non conformance response food safety can fail even when the organization takes action.
Fixing Only the Symptom
Correcting one record does not necessarily prevent the problem from returning.
Blaming the Employee
“Employee forgot” is often a symptom rather than a complete root cause.
Using Generic Corrective Actions
“Retrain staff” may be insufficient if the real problem is an unclear procedure or ineffective process.
Missing Product Evaluation
Food safety findings may require an assessment of potentially affected product.
Failing to Verify Effectiveness
A completed action is not necessarily an effective action.
Poor Documentation
If evidence of the response is missing, the organization may struggle to demonstrate what happened.
Using Digital Workflows for Corrective Actions
Managing audit nonconformance responses in sheets and emails may result in confusion as to who the owners, deadlines, and evidence and verification are of each issue.
A digital compliance workflow can consolidate the process.
Some good features are the following:
- Searching for assignment
- Follow-up on corrective action
- Task ownership
- Due dates
- Automatic reminders
- Attachments to documents
- Approval workflow
- Tracking audits
- Keep track of the status of
- Confirm effectiveness
DCN’s workflow compliance features also extend to corrective action workflows, providing the ability to assign tasks, set deadlines and monitor resolution through to completion. (Document Compliance Network)
This can give QA teams better visibility into open findings and overdue actions.
How DCN Supports Audit Non-Conformance Management
For the food industry, audit non conformance response food safety is more than just filling out a corrective action form. Teams need a dependable method to catalog findings, delegate responsibilities, collect supporting evidence, and show closure.
Document Compliance Network (DCN) offers compliance workflow and document management features that can assist firms in consolidating these functions.
DCN workflows can also be configured to handle corrective actions, document approvals, compliance-related activities, and the like. Its platform is intended to help teams monitor work from assignment to completion instead of tracking everything manually in spreadsheets and email. (Document Compliance Network)
Its document management capabilities can also help organizations maintain controlled procedures and supporting records. DCN Internal Document Management
For organizations preparing for food safety audits, centralized documentation can make it easier to demonstrate that findings were investigated, actions were completed, and supporting evidence was retained.
Audit Non-Conformance Response Checklist
Use this checklist when responding to a food safety audit finding:
- Record the finding accurately
- Identify the applicable requirement
- Assess immediate food safety risk
- Contain affected product or processes where necessary
- Determine the root cause
- Document the immediate correction
- Define corrective actions
- Assign responsible personnel
- Establish deadlines
- Collect supporting evidence
- Verify effectiveness
- Review for recurrence or trends
- Obtain appropriate approval
- Close and retain the record
Final Thoughts
A strong audit non conformance response food safety process turns an audit finding into an opportunity to strengthen the food safety management system.
The best system is “tactical,” that is, by understanding the finding, controlling the immediate threat, deriving a root cause, taking mitigation measures, documenting the response, checking on the effectiveness of the actions taken, and closing the issue formally.
Don’t reduce the size of the audit findings. The aim is to learn about the root cause of the problem and take steps to improve the situation that will lessen the chance of it happening again.
Digital workflows offer greater visibility and accountability for food manufacturers with more than one audit, corrective action, SOP, and compliance record to manage and monitor. An audit nonconformance can be a concrete step to a continual improvement in food safety if a system is in place and clear procedures have been established.
Frequently Asked Questions
Q1: What is an audit non-conformance?
Ans: An audit non-conformance occurs when an auditor identifies objective evidence that a process, record, product, procedure, or system fails to meet a defined requirement. These requirements typically originate from regulatory standards, internal food safety plans, or third-party certification schemes like SQF or BRCGS.
Q2: What is the first step in responding to an audit non-conformance?
Ans: The initial step is to clearly document the auditor’s finding, evaluate any immediate food safety risks, and execute containment actions to isolate affected products or halt unsafe processes. Once the immediate risk is controlled, the organization can initiate a thorough root cause investigation.
Q3: What is the difference between a correction and a corrective action?
Ans: A correction is an immediate fix applied to address the visible symptoms of a non-conformance, such as discarding a contaminated batch or re-cleaning a line. A corrective action addresses the fundamental, underlying root cause of the issue to ensure it does not happen again.
Q4: Why is root cause analysis critical for non-conformance resolution?
Ans: Root cause analysis identifies why a systemic failure occurred rather than merely treating its outward symptoms. Regulatory agencies like the FDA emphasize root cause analysis as an essential tool for building preventive food safety management systems and driving continuous operational improvement.
Q5: How should food manufacturers document and verify corrective actions?
Ans: Manufacturers must maintain a comprehensive response record detailing the audit finding, immediate corrections, root cause analysis, preventive action plan, responsible personnel, deadlines, and supporting objective evidence. Closure requires verifying effectiveness through follow-up inspections, record reviews, or process monitoring to confirm the issue remains fully resolved.
- [post_views]
- 0 Comments